• 84 " post mount minimizes heater footprint and saves valuable patio space
• Large aluminum disk reflector broadcasts radiant heat over a large area
• Safety shut-off control mounted on heater helps prevent fire hazard

Manual Ignition: heaters require no electrical connection and are the easiest to service and maintain. This heater utilizes a pilotthermocouple 100% safety shutoff. Pilot must be manually lit. Heater is turned off/on with a manual control knob located at the front of the heater.

Semi-automatic Ignition (Non-"E"-series): heaters require 24 VAC electrical to be connected in order to operate the main burner. This heater utilizes a pilot-thermocouple 100% safety shutoff. Pilot must be manually lit. Heater is turned off/on with electrical switch, timer or other control device by interrupting the 24 VAC supply to the heater. Control device is to be supplied by the installer. Manual control knob must be set to the ON position for this heater to operate with an electrical switch.

Automatic Ignition ("E"-series): heaters require 24 VAC electrical to be connected in order to operate. This heater utilizes an electronic ignition and monitors the heater through flame rectification. Heater cannot be manually lit. Heater is turned off/on with electrical switch, timer or other control device by interrupting the 24 VAC supply to the heater. Control device is to be supplied by the installer. The required clearance from combustible materials must be maintained on all heaters. In addition heaters must have adequate fresh air and ventilation to operate properly. 

Sunglo PSA265 Tech Sheet